|
Turn on your Computer
Connect the 3.5mm microphone jack to the “microphone”
port on your computers sound card. The microphone jack has
a small symbol.
Connect the .5mm headset jack to the “sound
out” port on your computers sound card. The headset
jack has a small symbol.
-------------------------------------------------------------
Click
here to find the new way to make long-term money online in
your spare time
-------------------------------------------------------------
Open Express Dictate and go to Settings.
Under Devices in Sound Record Device choose
either “Default Sound In” or if you see your sound
card listed choose this.
Under Devices in Audio Input Channel choose
Microphone.
Click OK to close and save.
Create a new dictation file and record a test
sample of audio. If the DB Display does not move this is an
indication that no audio is being recorded. Check that you
have plugged the correct jack into the correct port and try
again.
Rewind the file to the beginning and check
whether the audio was successfully recorded, this will also
test your headphones.
If there is no audio coming through the headphones
but the DB Display is moving check that the headphones jack
is plugged into the “Sound out” port (sometimes
symbolized by a speaker symbol).
Once you can record and hear audio through
the mic/earphones you are ready to go!
USB
Headset
| How
to choose between computer microphones | Headset
Installation Guide |
Analog
(non-USB) headset microphones | Logitech
USB 350 Headset | Reviews
of Plantronics Headsets
|
